Resilient IB-1 Sound Isolation Clip performs two main functions. First, because they are spaced in rows 24″ apart (generally), the drywall is attached with far fewer contact areas. Second, clips and hat track are resilient. They allow the wall to flex, and this increases sound isolation as well as lowering the troublesome primary low frequency resonance point.
This IB-1 Soundproofing Clip performs very similarly to other clips, but the low cost allows the contractor to instead invest in extra mass (drywall) and damping (Green Glue). The resulting system is far superior to using clips and drywall alone.
The IB-1 Clip can be used with wood or steel wall studs. These clips are particularly useful on open ceilings where there are neighbors overhead. Significant relief from neighbor noise can be obtained when we first start with clips to decouple the ceiling drywall.
IB-1 Soundproofing Clip Specifications
- Economical compared to expensive 2-Part Clips
- Similar Performance to 2-Part Clips
- Fast Installation, single screw attachment
- UL Rating for commercial installation
- Galvanized finish
- Length: 3 1/4″
- Height: 3/4″
- Width: 1 5/16″
- Vertical Spacing: 24″
- Horizontal Spacing: 48″
- Design Load: 36 lbs per clip