IB-1 Sound Isolation Clip

Resilient IB-1 Sound Isolation Clips perform two main functions. First, because they are spaced in rows 24" apart (generally), the drywall is attached with far fewer contact areas. Second, clips and hat track are resilient. They allow the wall to flex, and this increases sound isolation as well as lowering the troublesome primary low frequency resonance point.

This IB-1 Soundproofing Clip performs similarly to other clips, but the low cost leaves more room to invest in extra mass (drywall) and damping (Green Glue). The resulting system is far superior to using clips and drywall alone.

The IB-1 Clip can be used with wood or steel wall studs. These clips are particularly useful on open ceilings where there are neighbors overhead. Significant relief from neighbor noise can be obtained when we first start with clips to decouple the ceiling drywall.

NOTE: Use with 25 gauge 7/8" Drywall Furring Channel Only

IB-1 Soundproofing Clip Specifications

IB-1 Features

  • Economical compared to expensive 2-Part Clips
  • Similar Performance to 2-Part Clips
  • Fast Installation, single screw attachment
  • UL Rating for commercial installation
  • Galvanized finish

IB-1 Dimensions

  • Length: 3 1/4″
  • Height: 3/4″
  • Width: 1 5/16″
  • Vertical Spacing: 24″
  • Horizontal Spacing: 48″
  • Design Load: 36 lbs per clip

Soundproofing Clips Test Reports