Speedload Installation Overview

The Speedload dispensing system is specifically designed for high speed, low cost commercial application of Green Glue damping compound. Installation of Green Glue is faster and less expensive per square foot than ever before and this system is exclusively available from the Soundproofing Company.

Get Detailed Green Glue Speedload Instructions

This is a general overview of how to use the Green Glue Speedload Dispensing System. Full instruction manuals are provided free of charge when you purchase the product.

The Speedload Dispenser installs Green Glue 50% faster than tubes.

Easily fill the Speedload Dispenser with Green Glue
Apply Green Glue with Speed. Green Glue has the consistence of Ketchup.

Step 1: Load the Speedload Dispenser

Filling the Speedload Green Glue Dispenser
Pull back on the plunger to draw Green Glue into Speedload until it stops.

Step 2: Apply Green Glue to backside of drywall.

Apply Green Glue to backside on the Gypsum
Pull the trigger to dispense Green Glue in a random pattern onto the drywall.

Step 3: Hang 5/8" Drywall

Move drywall to location and screw into place (not nail)
Move drywall to location and screw into place (not nail).

Step 4: Secure Drywall wall with screws

Secure Drywall wall with screws
Fasten drywall to framing following local building codes.

Green Glue Coverage

The ideal coverage should be uniform throughout the sheet using 1 - 2 loads/tubes. Do not use more than 3 loads/tubes per sheet since too thick a layer will cause performance to drop. Green Glue will compress to a thin film. This film will not be continuous, and there will be desirable gaps and pockets in the coverage.

Cleanup - Green Glue is Sticky

There is nothing harmful about Green Glue, but warn your installers that it can be tough to clean up after it has dried. Take precautions such as drop cloths and latex gloves when using Green Glue. Take care to remove the Green Glue from unwanted surfaces before it dries. Use 70% Isopropyl Alcohol to clean up Green Glue.

Green Glue Dry Time

Assemble the Green Glue panels within 15 minutes after Green Glue applied. Sheets must be screwed together while the Green Glue is still wet.

Allow Green Glue 30 days of drying time for optimal sound isolation performance. Keeping the room warm and air dry will speed drying.